Current Updates

Version 5.1.2 – Sep 27, 2024

Added New resin materials
Updated official resin material templates
Added a High Clear splash screen when opening ideaMaker
Updated templates for Pro3 HS Series
Added the new OFP material templates for high-speed printers
Added the material interface optimization

Version 5.1.1 Beta – Sep 10, 2024

Added New Option for FFF Slicing Template: Allow Placing Seams on Non-Polygon Vertex
Added Notes for the Official Resin Materials
Optimized the Interface and Function of Adding Materials
Optimized the Pillar Rendering Speed for the FFF Support Structure
Updated 7 Slicing Templates of 3 Materials for Pro3 HS Series

Version 5.1.0 Beta – Aug 15, 2024

Added the Small Area Solid Fill Flow Compensation
Added the Avoid Slowing Down Outer Shell Speed
Added the Decrease Raft Surface and Model First Layer Temp.
Added the Settings of Enable Bottom Surface Temperature
Added Wipe Tower Flowrate and Wipe Wall Flowrate
Updated the Raft to Be Connected with Max Volumetric Speed
Added the Raft Surface Monotonic Order
Adjusted the Monotonic Control for the Bottom Surface
Added the Cross Hatch Infill Pattern
Optimized the Auto Orientation
Upgraded the DLP Support Structure Strategies and Optimized the Generation of Support Structures
Optimized the DLP Slicing Algorithm
Added a Linear Option for Exposure Time Transition Type
Added a hyper speed template of the new Standard White V1
Added 2 new filament templates for the RMF500
Changed the infill speed of the [Raise3D] Hyper Speed ABS V2 template

Version 5.0.6 – Jun 4, 2024

Added None option for the Raft Type
Upgraded the Anti-aliasing Method
Added Restore to the Last Saved
Added Reset Settings button function on the Support Structure Panel, and displayed different color of text for the Tab
Added Scarf Joint, and optimized joints in the model and enhanced the aesthetics of the finished item
Optimized the Advanced Settings: added the Quality Tab
Added Shrinkage Compensation
Added Precise Z Height
Added Maximum Volumetric Speed
Improved Gcode preview with enabling/disabling Travel under the Speed option
Added new slicing settings for the Override Slicing Settings
Modified the Firmware parameter values in Printer Settings
Modified the Firmware Type to Klipper for Raise3D Pro3 Series with Hyper Speed Kit, and Raise3D Pro2 Hyper Speed Series
Optimized the top surface: added the Only One Shell on Top Surfaces Function
Added Raise3D Pro3 HS Series Printer
Deleted all materials, all slicing templates under version 5.0.5 for Raise3D RMF500
Added materials and corresponding slicing templates for the new RMF500 hot end
Added new templates for Raise3D DF2

Version 5.0.5 – Mar 27, 2024

Add support for Raise3D DF2 Solution along with new feature for DLP
Add support for Raise3D RMF500
Integrate support for all Raise3D Hyper Speed Upgrade Kit templates. Change the models under the original high-speed mode to the following models

RAISE3D Pro2 – Hyper Speed
RAISE3D Pro2 Plus – Hyper Speed
RAISE3D Pro3 – Hyper Speed Kit
RAISE3D Pro3 Plus – Hyper Speed Kit

Add filaments for Raise3D Pro3 – Hyper Speed Kit and Raise3D Pro3 Plus – Hyper Speed Kit:

Raise3D Hyper Core PPA CF25 1.75mm
Raise3D Hyper Core PPA GF25 1.75mm
Raise3D Hyper Core ABS CF15 1.75mm

Add support filaments

Raise3D Industrial PPA Support 1.75mm
Raise3D Industrial PET Support 1.75mm
Raise3D Premium PVA+ 1.75mm

Add resin materials:

[Raise3D] Touch 2K Grey V1
[Raise3D] High Detail Apricot V1
[Raise3D] Standard White V1
[Raise3D] Rigid 3K Grey V1

FFF function and improvements
Other features and improvements

Version 4.3.3 – Sep 29, 2023

Added 7 new built-in filaments
E2CF is open to filaments restrictions
User-defined models open the upper limits of acceleration and speed for the prediction time.
Updated the material density of some materials.

Version 4.4.3 Alpha – Sep 29, 2023

Added 7 new built-in filaments and 18 templates for Raise3D E2CF
Add 1 new high-speed material Raise3D Hyper Speed ABS V2 (additional requirement, under development)
E2CF is open to filaments restrictions
In the normal mode, ideaMaker has removed threshold reminders for speed, warning pop-up notifications, and yellow exclamation point alerts in the Advanced Settings.
Updated the material density of some materials.

Version 4.4.1 Alpha – Mar 30, 2023

Added new PETG ESD templates for E2CF, Pro3 and E2
Added 3 PET CF templates for E2CF
Updated the PA12 CF+ template for E2CF
Added new Pro2 Series printers in Hyper Speed Mode
Added new Pro3 Series printing templates in Hyper Speed Mode

Version 4.3.2 – Feb 17, 2023

Added 9 new PETG ESD templates for E2CF, Pro3 and E2
Added 3 PET CF templates for E2CF
Updated the PA12 CF+ template for E2CF

Version 4.4.0 Alpha – Nov 11, 2022

Added the introduction of Raise3D Pro3 Series Hyper Speed printing.
Added Hyper Speed Mode option to enable Hyper Speed Mode to select Raise3D Hyper Speed Printer and Filament for slicing.
Added tags of different speed levels according to the printing speed, acceleration and volumetric speed in the selected slicing template when the Hyper Speed Mode option is enabled.
Added Hyper Speed tags to Raise3D printers that support Hyper Speed printing in the list of printers for Remote Connection and Upload to Printer.

Version 4.3.1 – Nov 3, 2022

Fixed the current printer selection that did not sync in the menu and the Prepare to Slice panel after changing the printer settings in the printer dialog.
Removed the unnecessary Wipe Tower’s bounding box, checking if the Wipe Tower function is disabled.
Fixed the issue that the Ironing function does not work on macOS.
Allowed the Overhang Shells Angle value to zero and disabled the Overhang Shells Detection if the Overhang Shells Angle is 90 degrees.
Fixed a display issue with the advanced settings dialog on Linux and Windows.
Fixed the GCode preview issue if the Build Plate Shape is an Ellipse.

Version 4.3.0 Beta – Aug 10, 2022

Added First Layer XY Size Compensation for Contours and First Layer XY Size Compensation for Holes options to control the printing compensation for outlines and holes for first layer to avoid Elephant Foot.
Added First Layer Solid Flowrate to control the flowrate for the Solid Fill at first layer.
Added Wipe Nozzle for Thin Wall option to enable Wipe Nozzle feature when printing Thin Wall structures.
Expand the solid fill regions to fill the hole whose width is smaller than the defined value.
Added Monotonic print options for Top, Bottom Solid Fills and Ironing under Advanced to be able to print Solid Fill lines with Monotonic Order to get better surfaces.
Added support to add slicing templates from ideaMaker Library Open Filament Program to E2CF and other printers.

Version 4.2.3 – Jan 25, 2022

Optimized Support generation to save material and print time.
Added Custom FFF Printer under Add New Printer page.
Added a check to compare the important printer settings.
Added filament type and name into the G-Code header file.
Added three filaments settings for Raise3D E2CF printers.
Added Volumetric Speed under G-Code Preview interface.

Version 4.2.2 – Nov 26, 2021

Optimized GCode Preview will show the previous layers.
Outer shell Z seams were added in each layer when previewed.
Isometric View will be updated to be default Preview.
added support for uploading GCode file to the Repetier Server.
Added “Upload to Octoprint and Repetier” option.
Added more Standard Primitives.
Added a Top Z and Bottom Z to check the intersecting surface.

Version 4.2.1 – Sep 29, 2021

Added slicing templates for Raise3D E2CF and Raise3D Pro3 Series
Added Raise3D PA12 CF and Raise3D PA12 CF Support filament settings.
Added “Single Shell Surface Mode” option.
Added check for heating code in Start Gcode. Added support for M568 Code
Added “Print Non-Manifold Edges” option.
Added support for GCode Thumbnails for OctoPrint and Mainsail
Added support for slicing active model only under Project Panel.
Added prompt to “Profile Generator” under “Prepare to Slice” and “Select Template”
Added access to ideaMaker Library under “Advanced Settings”

Version 4.2.0 Beta – Aug 24, 2021

Integrated ideaMaker Library into ideaMaker.
Added Boolean operations for models, including support for Union, Subtract, and Intersect.
Added new Texture Mapping type, Cube (No Mirroring).
Added the center point of outlines of support structure next to the belt sections when Place Seam on Belt Edge being enabled to be an option to be selected as Start Points.
Added Search feature under Advanced Settings.
Added Template Name modification feature under Advanced.
Fixed the missing G10/G11 code issue with firmware retraction enabled when Retraction Amount being set to be 0.

Version 4.1.1 – Apr 20, 2021

Added support for the Texture feature on the belt printer.
Added a Texture “Outside Only” option in the Texture Panel.
Added support for selecting different extruders to print Support Outline.
Added support for selecting different extruders to print Dense Support Outline.
Added Remaining Time and Printed Time information to the G-Code file.
Added Cubic and Honeycomb under the Support Infill Type.
Added support for showing and hiding structure features in the GCode Preview.

Version 4.1.0 Beta – Mar 15, 2021

Added Texture Feature.
Added new Modifier types.
Added support for converting an imported image into a 3D model.
Added support for Infill generated from image.
Added support to Belt 3D Printer.
Added support for selecting nozzle for Modifiers.

Read more about the new features added in ideaMaker 4.0.1
Version 4.0.1 – Nov 23, 2020

Added “Avoid Retraction at Start” option to enable/disable a retraction when extruder finishes the Start GCode and travels toward the models.
Added support to save the last viewed tab in Advanced Settings.
Added “Maximum Frame Rate” option under “Preferences” to set FPS for model display in ideaMaker. Also added GCode preview to avoid low 3D FPS issues in some operating systems.
Added “Show in Folder” option to be selected when exporting files, as well as the option to choose whether to show this dialogue the next time it is selected.
Added “Cross Section” feature under the Preview.
Fixed ideaMaker crash after clicking the “Slice” button when there is no template available under “Select Template”.

Read more about the new features added in ideaMaker 4.0.0 Beta
Version 4.0.0 Beta – Oct 14, 2020

Share Slicing Template to ideaMaker Library
Connect to OctoPrint to print
Added New „Light Color“ interface option
The model can be Edited and Modified in ideaMaker

Read more about the new features added in ideaMaker 3.6.1
Version 3.6.1 – June 30, 2020

Added “Auto” as new Layer Start Point Type.
Added Raft Extruder, Support Extruder, Dense Support Extruder and Raft Gap settings in the Filament Settings.
Added Extruder Temperature Settings under Per-Layer Settings.
Displayed the overhangs in the models.
Added standard shapes under the menu “File” > “Add Standard Primitives”.

Read more about the new features added in ideaMaker 3.6.0 Beta
Version 3.6.0 Beta – May 4, 2020

Added RaiseCloud Support, including the following functions.
The function of ideaMaker Library is added.
Added Welcome interface.

Version 3.5.3 – Apr 17, 2020

Added Overhang Shells Angle option.
When some of the Overhang Angles on the model are larger than the Overhang Shells Angle, shells on those parts of the model will be printed with settings set for Overhang Shells, including printing speed, flowrate and fan speed. The default Overhang Shells Angle will be 30 degrees.
Optimized Layer Start Point feature.
When Layer Start Point Type is Fixed, Seam Hiding will be set as None instead of Convex Corner or Reflex Corner to avoid the effect of Seam Hiding to Layer Start Point.
Optimized settings under PLA Standard template for Raise3D E2.
Added Save As under Advanced Settings.
Fixed the issue causing 0 shell generated on First Layer when slicing with First Layer Shells settings.
Fixed „Malicious Software“ warning when running ideaMaker on macOS Catalina.
Fixed the issue of failure to run ideaMaker on some Linux systems.
Fixed the extrusion calculation error when using Relative Extrusion.
Fixed the calculation of auto-arrange model under mirror and duplicate mode.
Added a check for whether Example models have been edited or not when saving .idea files.
Fixed some language and translation issues.

Read more about the new features added in ideaMaker 3.5.2
Version 3.5.2 – Mar 12, 2020

Added detecting options for Overhang Shells, including Overhang Shells Speed and Overhang Shells Flowrate which are used to control the flowrate and printing speed for the Outer and Inner shells for overhangs.
If you want to modify solid fill settings for overhangs, you can edit the Bottom Surface Layers settings under Solid Fill tab.
Added options for Overhang Shells Fan Speed to control the cooling fan speed during printing the shells in the overhangs.
Added warning when trying to exit ideaMaker in the middle of uploading print files.
Fixed issue of generating Wipe Tower and Wipe Wall with multiple Setting Groups being created.

Read more about the new features added in ideaMaker 3.5.1 Beta
Version 3.5.1 Beta – Dec 13, 2019

Added detection for ‘Vertex Points’ and ‘Thin Parts’ for overhang structures to make sure proper support structures have been created.
Added Rectilinear, Triangles, and Gyroid for Support Fill Type, and Rectilinear for Dense Support Fill.
Added ‘Simple Mode’ option.
Added a new feature that allows users the option of copying existing slice settings when creating new ‘Per-Group’ and ‘Per-Layer Settings’ to avoid re-adding old settings.

Read more about the new features added in ideaMaker 3.5.0 Beta
Version 3.5.0 Beta – Oct 24, 2019

Added Adaptive support.
Added Rectilinear, Triangles, and Gyroid for Support Fill Type, and Rectilinear for Dense Support Fill.
Updated Manual Support generation.
Added the option to disable unnecessary retractions when printing supports.

Version 3.4.2 – Jun 24, 2019

Increased the calculation speed of support boundary for big models.
Fixed the bug of not dropping the printing speed for small features due to the miscalculation of Minimal Layer Time.
Fixed the bug not avoid traveling through Holes with Avoid Travel Through Holes enabled.
Fixed the bug of generating a moving path for enclosed Thin Wall structures.
Fixed the bug of miscalculation of the model’s position when using Arrange Models.
Fixed bug that Outer Shell disappears on some models when Print Shells in Optimal Order enabled.
Fixed wrong scale issue when editing Local Transform in Scale after Max Fit.
Fixed some interface issues.

Read more about the new features added in ideaMaker 3.4.1
Version 3.4.1 – May 23, 2019

Added option under Modifiers Settings, Merge Modifiers Shells with Parent Models.
Added First Layer Extrusion Width Percentage.
Added Extrusion Width Percentage for Top Solid Fill Layers and Bottom Solid Fill Layers.
Added option to define the Maximum Supported Area Percentage.

Version 3.4.0.2855 Beta – Apr 4, 2019

Fixed the crash issue happens when loading STL files
Fixed the display issue of template list in „Prepare to Slice“ panel when deleting a template

Read more about the new features added in ideaMaker 3.4.0 Beta
Version 3.4.0 Beta – Mar 29, 2019

Added Adaptive Layer Height
Added Layer Height preview mode
Added Modifier Menu Icon
Sequential Printing

Version 3.3.0.2343 – Oct 31, 2018

Add slicing templates for Raise3D PC filament in N Series printer.
Fixed issue that the target temperature is not handled correctly for heating inactive extruder in advance.

Read more about the new features added in ideaMaker 3.3.0
Version 3.3.0.2341 – Oct 29, 2018

Added option to print shells in optimal order to reduce travel moves.
Added seam hiding options to place the start point on the corner.
Added option to set the firmware type of printers.
Added option to omit outputting RaiseTouch-specified gcodes for third-party printers and you can specify other gcodes to overwrite default commands.
Added support for viewing and exporting timelapse of completed print task in Dashboard under Remote Connection (RaiseTouch 1.0.0 or newer is required).
Added the camera shot button in the camera view under Remote Connection.
Fixed Wipe Wall generated incorrectly across different setting groups issue.
Fixed the issue that the retract incorrectly with Avoid Retraction Inside Models and Avoid Traveling Through Holes both enabled.

Version 3.1.7 – May 11, 2018

Fixed the crash bug during connecting to printer or view files in remote control
Fixed the issue that images not displaying correctly under High-DPI displays

Read more about the new features added in ideaMaker 3.1.6
Version 3.1.6 – May 3, 2018

Added Slicing Templates for the Pro2 Series
Added “Maximum Shells Overlap Percentage”
Improved Thin Wall Processing
Improved Gap Filling Processing
Added the Option to Enable or Disable Fan Speed Settings
Added Slicing Settings under Filament Settings
Added Slicing Template information into .data File
Added an Auto-Reconnection Function for Remote Control
Added Support for 3MF
Added Support for Exporting Multiple Models
Added Report Bug under Help
Added an Option for Selecting Currency for Filament Price
Added Support for Non-integer Value for Shell
Added Korean Language
Added Model Information in the Uploading Queue
Added a Rename Function
Fixed Wrong Tab Order Issue in Mac
Fixed Small Segments Calculation Issue of WipeWall and Brim
Fixed Issue of Uploading Progress Display not Updating in time

Read more about the new features added in ideaMaker 3.1
Version 3.1.0 – January 30, 2018

Added more infill patterns: Honeycomb, Triangles and Cubic
Added new solid fill pattern: Concentric
Added acceleration and jerk setting in slice template
Added coasting distance option
Added moving arrow for manual moving model in X & Y directions besides the current arrow for Z only
Improved printing order of solid fill layer
Optimized the nozzle moving path after nozzle purging
Enlarged the pillar size range from 1-10mm to be 1-100mm
Fixed the edit button gray-out problem after importing a new slicing template from local disk unless exit or reopen
Fixed the bridging calculation error
Fixed the bug of not merging circle line for Brim
Fixed the bug of top and bottom solid layers generating calculation
Fixed the bug of normal type support generating
Fixed the bug of calculation of top solid infill layers speed
Fixed the bug of left and right extruder estimated filament amount
Fixed the bug of OBJ file NOT be parsed correctly

Read more about the new features added in ideaMaker 3.0
Version 3.0.5 – December 18, 2017

Added new function to arrange the models automatically
Added an option to fill small gaps between the shells
Added options to import and export group and layer settings separately with main slicing template export
Size of manual support now will be recalculated after scaling the models
All the duplicated or copied models will be given different names to be identified with each other
Fixed examples not founded bug in Mac OS X

Version 3.0.4 – November 29, 2017

Changed the Raft shape to be round corner
Optimized some printing settings in default templates
Shown the current Printer Type inside the title bar
Added gcode Post-process under Advanced -> GCode tab where you can replace or delete the characters in batches
Changed the duplicated position to be kept as relative position among models when selecting multiple models to duplicate together
Added Horizontal Expansion under Advanced -> Support tab to expand support structure in XY direction
Added Support Base Layers under Advanced -> Support tab to increase adhesion of support structure to below layers
Fixed the calculating bug of PlaceHolder

Version 3.0.3 – November 13, 2017

Added an option to disable Wipe Wall and Wipe Tower under Per-Layer Settings
Added more shortcuts
Fixed display bugs under Remote Connection
Fixed bugs of the save button when importing the template from lock disk
Fixed the crash bug of the edit button under Per-Layer Settings
Fixed the crash bug happens when slicing multiple models with multiple setting groups and there has no model inside the first setting group

Version 3.0.2 – November 3, 2017

Added Upload gcode file, Export gcode file and re-slice in Slice Preview window
Added Support in Per-Group Settings
Added Enable Printer Discovery. With this option disabled, ideaMaker will stop searching machines automatically, so that there will have no incoming network connection
Fixed bugs of generating Dense Support Layer
Fixed bugs of not updating Per-Group Settings and Per-Layer Settings in time when switching the different Setting Group
Fixed bug of max limit of duplication

Version 3.0.1 – October 28, 2017

Added judgement when uploading to check whether the printer type chosen for slicing is the same as the printer your want to upload the file to
Added explanation for options under Advanced Settings
Fixed the display bug of preview page under Higi-DPI
Fixed the crash problem caused by calculation of generating support structure

Version 3.0.0 – October 23, 2017

Different slice templates for different models
Added different settings for various layers of the model
Added different settings for each extruder
Added the temperature control over the different layers of the model
Wipe tower infill ratio
Set the extruder for the dense support
Infill Extrusion width percentage
Print parts in sequential order
Bridging speed and extrusion width percentage
Added XY Size Compensation
Added Extruder Switch GCode, Layer Change GCode and Retraction GCode
Added placeholders in G-code script section under GCode tab
Rename G-code file before uploading to the printer
Find the G-code file after exporting
Added shortcuts to navigate G-code layers and steps in preview window
Improved G-code preview for the structure mode, and added previewing print speed in the preview window
Able to duplicate and remove printer templates
Able to remove filaments and the associated slice templates
Change the calculation of the z-position for the model from the model’s center to the bottom line of the model.
Added obsolete template management
Added more information inside the exported slicing template

Version 2.6.0 – May 18, 2017

Added a feature to set Wipe Tower
Improved scaling of multiple models
Improved extruder switch strategy for Wipe Wall
Improved spiral vase mode
Improved the speed of gcode generation
Fixed issue that the option of layer start point type takes no effect
Fixed the incorrect calculation of brim structure

Version 2.5.1 – March 28, 2017

Added option to disable positioning imported models automatically
Show tips for shortcuts in the user interface
Save the checked state of perspective and orthographic view, the edges and the wireframe mode
Fixed issue that the „Current Type of Printer“ setting is reset after reinstallation
Fixed the incorrect calculation of vertical offset layers in support structures

Version 2.5.0 – March 19, 2017

Added a feature to set infill extruder
Added support for slicing with unsaved slice templates
Added support for disable placing models on platform after rotating, scaling and mirroring
Added support for Russian language
Added support for changing the settings of printers and filaments in the „Select Template“ window
Added option to save and restore window state
Added option to save and restore the selections and states in the slice preview window
Added option to set maximum amount of object duplicating
Added estimated price shown in the slice preview window
Change shortcut to Ctrl+Left Mouse for rotating camera view in the non-view operation mode
Flip mesh orientation automatically after mirroring models
Improved STL file parsing on German version of Linux
Fixed issue that the calculation of bounding box is incorrect after rotating models
Fixed mesh errors of example models

Version 2.4.0 – January 09, 2017

Added a feature to set different type of wipewall
Added a feature to set extrusion width
Added a feature to keep holes in raft
Fixed issue of scaling models
Fixed issue of selecting the current printer
Fixed abnormal exit issue that may occur when saving slice templates

Version 2.3.0 – November 21, 2016

Added a feature to export OBJ file
Added a feature to set welding distance for STL file
Added a feature to adjust the offset distance of WipeWall
Added a feature to judge whether Raft is in a legal position
Added examples models
Added using data statistics in remote control (required the Raise Touch verison 0.8.0 or later)
Added uploading queue in remote control (required the Raise Touch verison 0.8.0 or later)
Added undo/redo function in manual support
Improved the Rotate function to be World Transform and Local Transform
Improved the Raft/Brim/Skirt option and interface
Modified the Task Finished interface in remote control

Version 2.2.3 – August 23, 2016

Added a feature to add manual supports
Added a feature to set infill angle of supports
Added a function to check right nozzle printing range
Added orthographic view
Improved path generation
Improved slice speed
Fix a bug that the printers from bookmarks are not listed in the file uploading form

Version 2.2.1 – July 6, 2016

Added a feature to set dense support in support structure
Added a feature to control the printing sequence of outer shell and inner shell
Added a feature to set global offset in gcode files
Added a option to disable retraction inside models
Added a option to enable skirt while using raft
Added a feature to set layer start point
Added a feature to lay flat via specified faces
Improved scaling models to specified dimensions
Improved moving and scaling models
Fix a bug in checking models on platform

Version 2.2.0 – May 24, 2016

Added new fill pattern
Added a feature to merge multiple models
Added a feature to move models at z-axis
Added a feature to align models together
Keep z-position while cutting or splitting models
Copy extruders or bed temperature from the template to be duplicated
Display the selected template first while duplicating the template
Fix crash issue while editing template

Version 2.1.6 – April 28, 2016

Added a feature to add custom device information via remote control
Added a feature to pause the print at certain height (required the Raise Touch verison 0.6.7 or later)
Added a feature to set fan speed at certain layer
Changed to show materials in filament settings in the order of most recent modification
Fixed a bug of infill over-extrusion

Version 2.1.5 – April 19, 2016

Added a function to zoom and pan in 2d mode of slice preview
Added z-pos and layer info in remote control interface
Optimized the default focus button in „Edit template“ dialog
Update the filament settings for V2 hot end
Remove the duplicated default slice templates

Version 2.1.4 – April 1, 2016

Added slicing templates for V2 hot end
Added a function to import/export slicing template
Added a function to drag in slicing template
Improved model snapshots

Version 2.1.3 – March 29, 2016

Added support for Linux system
Added a function to add or drag in multiple model files
Added the printing task recovery list in remote control interface
Added a function to set temperature in the „Home“ page in remote control interface
Added a function to create folders in local storage in remote control interface
Added a function to copy, move, delete and rename multiple files and folders in remote control interface
Added a reminder for safe mode in remote control interface
Added a battery volume display
Added WiFi signal strength display
Added a function to resize in the file uploading interface
Added a function to set fill density of the top layer of raft
Added a reminding of heat bed temperature set point too high
Added a function to support mouse dragging outside the interface window
Optimized the focus of buttons in the interface of slice settings
Optimized printing time display to show remaining print time
When export STL file, keep the model position, size and orientation information
Increase the loading speed of icon pictures in remote control interface
Fixed a bug in estimating printing time in slicing
Change the „Print Connect“ window to non-modal

Version 2.1.2 – February 22, 2016

Added more parameters in first layer settings
Added z-axis movement speed
Added Z-hop in retraction
Added shortcuts for editing and deleting slice template
Added shortcuts for deleting models on Mac OS X
Added check for file names starting with a ‚.‘
Improved zooming in and out in slice preview
Improved processing mouse wheel event for the popup dialogs
Removed the retraction when printing raft
Fixed a bug when ’save as‘ the edited print template

Version 2.1.1 – February 14, 2016

Added more parameters in retraction settings
Added more parameters in infill settings
Added a function to adjust angle in small steps when cutting a model
Fixed a bug of retraction compensation
Fixed a temperature bug when using right extruder only
Improved the edit and save function of slicing template
Fixed interface English expression
Fixed a bug of capitalizing the letters in the print file name

Version 2.1.0 – February 5, 2016

Added a reminder for slicing template modification
Added a warning for low slicing temperature setting
Added a ’save as‘ function to slicing template
Added a function to adjust the model angle one degree per step
Added keyboard shortcuts in slice preview
Added to function to choose the amount of models duplicated
Added a function to export an stl file
Added a right-click menu to the model list, menu includes delete, copy and export
Improved slicing workflow
Improved compatibility for retina displays on Mac OS X
Fixed a bug in slicing
Fixed some mistakes in the remote control interface

Version 2.0.6 – January 21, 2016

Added extra option for retraction at layer change
Added „connect“ button to toolbar for connecting to Raise3D N-series printers via network
Improved compatibility for retina displays in Windows
Add print file name to slice preview title bar
Fixed window shown black on some graphics card

Version 2.0.5 – January 12, 2016

Added retraction option in slice preview
Improved handling with drag-and-drop
Improved parameters of raft and support
Modified retraction settings, made it compatible with more third party PLA filaments.
Fixed issue that values are incorrect while change model size
Fixed sync problem when connecting to printer
Fixed issue that printer setting can not save
Fixed incorrect offset which slicing skirt without raft

Version 2.0.4 – January 3, 2016

Fixed encoding issue of slice template
Fixed crash issue that occurred when clicking advance setting on Mac OS X
Fixed bug that raft has drift when using multiple extruders
Record last open or save directory for convenient
Improved UI layout
Improved extruder selection for support, raft and models

ideaMaker® Release Notes

Current Updates

Choose your country or region

The United States and Canada

Europe

Asia Pacific

Latin America and the Caribbean

Africa and Middle East