This hot end is compatible with the following Raise3D filaments:

Hyper Speed: PLA, ABS (V1& V2)

Premium: PLA, ABS, PETG, ASA, PC, TPU-95A, PVA+

Industrial: PETG ESD

If equipped with a 0.4mm Silicon Carbide Nozzle, this hot end is also compatible with the following Raise3D filaments:

Hyper Core: PPA CF25, PPA GF25, ABS CF15

Industrial: PA12 CF+, PA12 CF Support, PPA CF, PPA GF, PPA Support, PET CF, PET GF, PET Support

Product specifications:

Packaging Size (WxDxH): 117×80×73mm

Weight with Packaging: 130g

Product Introduction

High-flowrate hot ends designed for the Pro3 Series in Hyper Speed Mode.

For installation and usage of the 0.4mm Hyper Speed Hot End, please click here. 

Please note that for Hyper Speed to function correctly, the Hyper Speed Hot Ends 0.4mm (Pro3 Series Only), the Hyper Speed Auto Calibrator (Pro3 Series Only), and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.

For Raise3D Pro3 Series 3D printers.

Prices may vary by region.

Customers outside of the US, please contact a local Raise3D distributor or reseller to get a quote or tech support.